0
1
이전
ELIM EL-IG8E4G-POE 8P PoE+2P+4P SFP 산업용 스위치 <견적진행>
다음
위로

ELIM EL-IG8E4G-POE 8P PoE+2P+4P SFP 산업용 스위치 <견적진행>
GigaE 8포트 POE+GigaE 2포트+4포트 SFP, QoS, Ring, 50ms 장애복구, 전원이중화, 극성보호 회로적용
판매가격 0
모델명 EL-IG8E4-POE
제조원 ELIM
원산지 대한민국
재고 판매중
구매수량 EA  
본 제품은 10/100/1000Mbps PoE 8Port + 2Port 제공 및 Giga SFP 4Port를 이용하여 광케이블로 전송 하는 L2 Switch 이다.
송, 수신부 에서는 Ethernet 입,출력 표시용 LED가 부착되어 별도의 장비 없이 시각적으로 통신여부를 확인할 수 있으며
10개의 Ethernet port는 HUB가 필요 없이 확장이 가능 하며 Web 및 SNMP를 통하여 여러 모드로 관리 할 수 있다.
포트별 PoE(Power Over Ethernet) 기능이 내장되어 있어 PD장비의 전원 공급이 가능하다.
.CCTV, ITV and traffic control  System
.CATV  System
.Security System
.Process control and monitoring  System
-.  Port 10/100/1000Base-T + 4 (100M/1G) SFP L2 Plus  Managed POE+ Switch.
-.  L2+ 기능/  더 나은 Manageability, Security, QoS 및 성능을 지원.
-. 28G backplane bandwidth.
-. SNMP v1/v2/v3, RMON(groups1,2,3,9), Telnet, CLI, WEB  Management.
-. STP(802.1D) and RSTP(802.1W) 지원.
-. Switching features including 802.1Q VLAN, Mirroring, Port isolation, IGMP Snooping, DHCP Snooping, LLDP,
    POE+ management, IP Source Guard, ARP inspection, ACLs등의  기능 지원.
-. Jumbo frames support up to 9.6K kilobytes
-. 포트의 구성에 따라 IEEE 802.3af IEEE 802.3at PoE 지원
-. Full-Duplex, Half-Duplex mode Auto-negotiation
-. IEEE802.3 10Base-T, 802.3u 100Base-TX 100Base-FX,802.3ab 1000Base-TX  
-. Point To Point Linear Add/Drop Ring 지원
-. G.8032 ERPS,  장애복구 <50ms 이내
-. 1Port 접점 출력 (전원불량)
-. DC 48V, 전원 이중화 및 극성 보호회로 적용.
-. Din Rail


 
Standard configuration                 - 10 Port 10/100/1000M RJ-45 
                                                         - 8p
                                                         - 4 gigabit optical port  1 Console port
Backplane                                       - 28Gbps
Spanning Tree Protocol                - Standard Spanning Tree 802.1d Rapid Spanning Tree(RSTP)802.1w
G.8032 ERPS                                  -  <50ms ring protection for industrial high reliable application
Aggregation                                   - Link Aggregation Control Protocol (LACP) IEEE 802.3ad; Up to 12
                                                           groups; Up to 16 ports per group
VLAN                                              -  Support up to 4K VLANs simultaneously (out of 4096 VLAN IDs);
                                                            Port-based VLAN; 802.1Q tag-based VLAN
IGMP snooping                             - IGMP limits bandwidth-intensive multicast traffic to only the requesters;
                                                          supports 1024 multicast groups
Secure Shell(SSH) Protocol        - SSH secures Telnet traffic in or out the switch, SSH v1 and v2
                                                          are supported
Secure Sockets Layer(SSL)        - SSL encrypts the http traffic, allowing advance secure access to the
                                                          browser-based management GUI in the switch
Port Security                                 - Locks MAC Addresses to ports, and limits the number of learned
                                                          MAC addresses
IP Source Guard                           - Prevents datagram with spoofed addresses from being in the network
Storm control                               - Prevents traffic on a LAN from being disrupted by a broadcast,
                                                         multicast, or unicast storm on a port
ACLs                                              - Support for up to 256 entries; Drop or rate limitation based on source
                                                          and destination MAC, VLAN ID or IP address, protocol, port,
                                                          differentiated services code point (DSCP) / IP precedence, TCP/ UDP
                                                          source and destination ports, 802.1p priority, Ethernet type, Internet
                                                          Control Message Protocol (ICMP) packets, IGMP packets, TCP flag
Hardware Priority Queue             - Support 8 hardware queues
Scheduling                                    - Strict priority and weighted round-robin (WRR)
                                                          Queue assignment based on DSCP and class of service (802.1p/CoS)
Classification                                - Port based; 802.1p VLAN priority based; IPv4/IPv6 precedence/ type
                                                         of service (ToS) / DSCP based;
 
Rate Limiting                                - Ingress policer ; egress shaping and rate control ; per VLAN, per port
                                                          and flow based
Web GUI interface                        - Built-in switch configuration utility for browser-based device
                                                          configuration(HTTP/ HTTPs). Supports configuration, system
                                                          dashboard, maintenance, and monitoring
Dual Image                                    - Dual image provides independent primary and secondary OS files for
                                                          backup while upgrading
Firmware upgrade                        - Web browser upgrade (HTTP/ HTTPs) and TFTP; Upgrade through
                                                          console port as well
Port mirroring                               - Traffic on a port can be mirrored to another port for analysis with
                                                          a network analyzer or RMON probe. Up to N-1 (N is Switch’s Ports)
                                                          ports can be mirrored to single destination port. A single session is
                                                          supported.
Other management                      - Single IP management; HTTP/HTTPs; SSH; RADIUS; DHCP Client;
                                                          SNTP;
                                                          cable diagnostics; ping; syslog; Telnet client (SSH secure support)
Link detection                              -  Compliant IEEE802.3az Energy Efficient Ethernet Task Force.
                                                           Automatically turns off power on Gigabit Ethernet RJ-45 port when
                                                           detecting link down or Idle of client. Active mode is resumed without
                                                            loss of any packets when the switch detects the link up
Cable length detection                - Adjusts the signal strength based on the cable length. Reduces the
                                                         power consumption for cables shorter.
Jumbo frames                              - Frame sizes up to 9KB sup

MAC Table                                    - Up to 8K MAC addresses
Link Layer Discovery Protocol   - Used by network devices for advertising their identities, capabilities,
                                                         and neighbors on a IEEE 802 local area network, principally wired
                                                         Ethernet.
Network security                           - IEEE 802.1x, port-based access control, RADIUS, TACACS
                                                        - Supporting DHCP snooping on the hardware
                                                        - Supporting DAI and static/dynamic ARP prevention on the hardware
                                                        - Supporting IP ACL, MAC ACL and VLAN ACL on hardware
 
Size                                                 - 165*147*52.5mm
Power Source                                - Input 90~240VAC,50-60Hz Output DC 48V 
POE power consumption              - Up to 250W (including POE power supply) and supporting the 802.3af
                                                           (15.4W) full load or 802.3at (30W) full load on 8 ports.
Indicator                                         - Power indicator, system indicator, connection/data forwarding
                                                            indicator, 10/100M indicator
Environment                                  - Working temperature : -40 ~ 80℃
                                                        - Storage temperature  : -45 ~ 85℃
                                                        - Humidity: 0-90% no condensation


고객님 결재 완료 확인후 
1~3일 이내 전국(도서지방제외)으로 택배를 통해서 배송됩니다.
교환 및 반품은 배송 후 14일 이전에 가능합니다.

제품 이상이 아닌 경우는
제품을 개봉하지 않은 재판매가 가능한 상태이어야 하며,
저희 고객센타(전화:02-716-3799)로 연락을 주시면 신속히 처리를 해 드리겠습니다.

환불의 경우 신용카드 결제시는 신용카드 취소를
온라인 입금인 경우, 주문자 계좌번호를 알려주시면 3일내로 입금처리해 드립니다.

 

***중요공지***
wirelesscafe.co.kr 이외의 도메인으로 접속한 경우에는 결제시
아래 그림과 같이 보안오류가 발생하오니,다시 wirelesscafe.co.kr 로 재접속후
구매를 진행하여 주십시요.

ssl-1